Installing pavers can be a great way of enhancing your outdoor space. You can create patios, pathways, and driveways that are functional as well as visually appealing. The process usually involves digging to form a solid base. But what if you don’t want to dig? You can level the ground in a variety of ways, whether you want to save time or not disturb the landscape. How to level the ground.
- Evaluate Existing Surface
Assess the area before you begin. Assess the unevenness of the surface and note any bumps or depressions. You can then decide the amount of work required to level out the surface. The process is much easier if the surface is relatively flat. You may need to add additional materials, such as sand and gravel, to even out slopes.
- Clear the Area
Remove any debris such as leaves, rocks, or roots that may interfere with the leveling procedure. Remove grass and plants that may interfere with the leveling process. It’s not necessary to dig but you should make sure that the surface is clear of any obstacles.
- Use Sand as a Base Layer
Sand is a great material to use for leveling the ground without having to dig because it’s easy and quick. Spread a thick layer of coarse sand on the area you intend to pave. The sand should be 1-2 inches thick depending on the amount of leveling required.
Spread the sand with a rake. Start at the highest point, and gradually work down to lower areas. This will fill in any dips or uneven patches. It is important to achieve a level, smooth surface.
- Compact The Sand
Compact the sand after spreading it. This will create a solid base for the pavers. This step can be done with a plate or hand compactor. Compacting the sand helps to eliminate any air pockets, and will ensure that pavers rest on a flat surface. To ensure that the surface is level, use a straightedge or level to check it frequently.
- Lay the Pavers
You can start laying the pavers once the sand has been compacted. Place the pavers closely together, starting at one corner. Tap each paver gently into the sand with a rubber mallet as you place it. Continue to check the leveling as you move along in order to maintain a uniform surface.
- Add Joints Sand
Spread fine sand on the surface after all pavers have been installed. Sweep it into the joints in between pavers. This will prevent them from shifting and help to lock them into place. Then, compact the surface once more to secure the pavers into the sand.
With the right materials and careful preparation, it is possible to level the ground without digging. Sand can be used as a foundation layer to create a stable, level surface for pavers, without having to dig a lot. This is a great method for small projects or places where you don’t want to disturb the landscape. You can create a professional finish with a little attention to detail and patience. This will enhance your outdoor area for many years.
This post was written by a professional at Apexx Enterprise LLC. Adam Ortega founded the company https://apexxenterprise.com/, in 2016 at only 20 years old. Mr. Ortega has become a licensed general contractor Tucson in the state of Arizona like his father and grandfather before him. Apexx Enterprise LLC is licensed, bonded, and insured and it is available for review at the Better Business Bureau. Apexx Enterprise LLC has won many achievements within the Home Advisor platform and we have multiple reviews as well. Their Mission Statement – “Our crew at Apexx Enterprise will perform the highest quality construction services for our customers. We aim to achieve our mission through total service satisfaction and by delivering our services while maintaining the highest levels of professionalism, integrity, and honesty.”
